![]() ![]() Thanks for your ideas, I've run out of mine. So, have I made everythig clear this time? Sliding to the left turns down screen brightness, and right turns it up. I connect the laptop to an external monitor and the everything looks perfect on the monitor. Step 1: Click on the Start menu (The Windows icon) Step 2: Click on Settings Step 3: Open up System, then click Display Step 4: Right under Brightness and Color, use the slider to adjust Screen Brightness to the level that suits you. I put it back on HP1 and again it is dimm. I take out the screen (straight out the MB, with the cable) and test it again on HP2, where it works perfectly. When it opens, click 'System' in the sidebar, then select 'Display. ![]() When I finished the job, and turned on HP1 to check the screen, I realised the brightness was poor (max 70% of the normal brightness) and also the "adjust brightness" scale was decalibrated (the scale is divided into 10 steps, the first 8 steps turning the brightness up, but the last 2 turn it back lower). First, launch Settings by pressing Windows+i on your keyboard. While doing the switch I realise I still had the battery connected on HP1. The "transplant" is done by taking out the display with the connector from the MB, not just the lcd screen. I decide to replace the screen so I take the display from HP2 (same model, both original displays) and I install it to HP1. ![]() Although the LCD shows signs of the accident, being partially black, the brightness of the readable part of the screen is 100%. One day by accident I break the display of HP1. Thanks for ypur answers, and let me clarify the problem: I have 2 laptops, both are HP probook 4520s, HP1 is my good laptop and HP2 is the spare-parts laptop, both are working fine. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |